Remote control
1 Remote control selection switch
Switch to change the setting of the remote
control. For details, refer to Setting remote
control code type on page 87.
2 VOLUME button
Press to increase or decrease the volume.
3 REAR.S button
Press to switch between the video sources
(such as DVD or AV) on rear display.
4 SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
5 Joystick
Move to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
6 DIRECT button
Press to do direct channel select when
using an XM tuner.
7 Remote control operation mode switch
Switch the operation mode between AVH,
DVD and TV modes. Normally, set to AVH.
! AVH For common operation of this
unit
! DVD Only for DVD player operation
! TV Only for TV tuner operation
For details, refer to Using the remote control
operation mode switch on the next page.
8 PGM button
Press to operate the preprogrammed func-
tions for each source. (Refer to Using the
PGM button on page 96.)
9 BACK button
Press to return to the previous display.
Whats What
En
17
Section
03
Whats What
