A SERVICE OF

logo

Installation and commissioning
21
Align belt-guard 1 in such a way that both
the motor pulley and the V-belt run freely.
Tighten screws 2.
A PFAFFmotor is shown in
Fig. 8-04. If another motor is
used, carry out this step accor-
ding to the instructions in the
motor instruction manual.
Fig. 8 - 04
1
2
8
.01.04 Mounting the lower V-belt guard
This step is eliminated for integrated sewing motors.
2
8.01.05 Mounting the spool holder
Mount the spool holder as shown in
Fig. 8-05.
Insert the spool holder into the hole in
the table top and fasten it with the nuts
enclosed.
Fig. 8 - 05