5.1.17 (H) RUN SELF TESTS
When you press <H> to select self tests, the scanner will perform up to nine self tests.
( The scanner does not use tests 7, 8 and 9 if the display system is not installed.)
Self Test 1 CPU RAM:
This test the random access memories on the CPU Board.
Self Test 2 Cals Board:
This tests the random access memories on the CALS Board.
Self Test 3 CCB Line Generation:
This tests the End-of-Line interrupt signal generation of the CCB Board.
Self Test 4 IP SCB Section:
This tests the resolution control circuit of the Image Processor Board.
Self Test 5 IP Convolution:
This tests the convolution and area averaging function of the Image
Processor Board.
Self Test 6 Camera Response:
Not currently implemented.
Self Test 7 Display Memory:
This tests the random access memories on the Display Board.
Self Test 8 Display Interrupt:
This tests the interrupt function of the Display Board.
Self Test 9 Display DMA Completion:
This tests the DMA function of the Display Board.
