HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Basic Configuration Commands
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2.5.3 Parameter Description
<value>:
0: The MT sends an abbreviated header and tail and adopts the result code in the
digit format.
1: The MT sends a complete header and tail and adopts the result code in the
detailed string format (default value after startup).
In case of using the command without <value>, <value> is set to 0.
2.6 Q–Command for Controlling Return of the Execution
Result
2.6.1 Syntax
2.6.2 Interface Description
This command sets whether the MT returns the execution result to the TE.
2.6.3 Parameter Description
<value>:
0: The MT returns the execution result (default value after startup).
1: The MT does not return the execution result.
In case of using the command without <value>, <value> is set to 0.
2.7 &F–Command for Restoring Factory Settings
2.7.1 Syntax
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR<CR><LF>
