A SERVICE OF

logo

Open as PDF
next previous
9
Clean the aerator and filters -- all models
If the water flow is reduced over time, clean the aerator
(a) and the filters (b).
Turn the water supplies off (1). Disconnect the power
cable (2).
Unscrew the aerator (a) with the service key.
Disconnect the hot and cold supply hoses from the
adapters. Remove the filters (b).
At another sink, rinse the filters and the aerator.
Reinstall the aerator.
Replace the filters. Reconnect the hot and cold supply hoses (see page 4).
Turn the water on (1).
Reconnect the power cable (2).
2
1
a
b
2
1