A SERVICE OF

logo

2
Talis S Lavatory Mixer
32020XX1
32020XX1
Technical Specification
Flow Rate 2.2 gpm
Max incoming water pressure 145 psi
Recommended incoming water pressure 14.5 - 72 psi
Max incoming hot water temperature 176
o
F*
Recommended incoming hot water temp. 120
o
F - 140
o
F*
Maximum mounting surface thickness 1 1/2”
Hole size 1 1/4”
*Prevent accidental scalding - know and follow all applicable local plumbing codes when setting the temperature on the water heater!
Installation Considerations
This faucet requires supply stops with 3/8” compression fittings (not included).
Please be sure that the faucet is in good condition, and that all parts are present before beginning
installation.
Flush the supply lines thoroughly before installing the faucet. Damage to the cartridge caused by
debris is not covered by the Hansgrohe USA Limited Lifetime Warranty.
The faucet includes a high temperature limit stop which should be re-set to protect children from
accidental scalding.
Installer - please leave this manual for the homeowner as it contains important information on the
faucet.