A SERVICE OF

logo

BLN1-600A Chapter 5: Maintenance 77 of 116
5-2 Preventative Maintenance
Our blenders need periodic maintenance to provide long dependable service. Check these
elements regularly:
Check functionality of safety circuit daily.
Maintain proper air pressure and drain water from trap assembly on regulator as
required.
Periodically lubricate slide gate rails.
Always remove plug and disconnect power before servicing blender.
Always read operating manual before operating or servicing blender.
For gear boxes on BD, SGBD, CSG-4000/6000 and RAM units with right angle gear boxes:
Change oil after initial break-in period of 250 hours of operation and at 2500 hours of
operation or 6 month intervals after break-in period.
Recommended oil is Mobil SHC 634 Synthetic oil. 5 gal P/N: OIL0041
Part Description
Part Number
Oil Capacity
(Fluid Ounces)
4000/6000 Right
Angle Reducer
51415
13
160.00280.00
11
RAM
51183
4