BLN1-600A Chapter 2: Functional Description 15 of 116
Figure 2: Equipment Specifications
Figure 3: Typical Blender Assembly
150 (*1) 500 900 2500 4000 6000
150 (68) 500 (227) 900 (410) 2500 (1135) 4000 (1815) 6000 (2725)
2 to 4 2 to 6
2.0 (50) 2.5 (63)
1.5 (38) 2.0 (50)
0.7 (20) 3.0 (85)
0.2 (5) 2.7 (77)
0.07 (20) 0.18 (50) 0.38 (11) 0.82 (23) 1.23 (34) 2.17 (61)
1.5 (0.7) 4 (1.8) 8 (3.6) 25 (11.3) 35 (15.8) 45 (20.4)
1 @ 5 kg 2 @ 3 kg 2 @ 5kg 2 @ 10 kg 2 @ 15 kg 2 @ 20 kg
0.18 (5) 0.25 (7) 0.56 (16) 1.1 (31)
1/8 (0.09) 1/3 (0.249)
42
2.5 (63)
250 (115) 375 (170) 450 (205) 650 (295)
350 (160) 425 (190) 550 (250) 800 (360)
Height (*3) 34.5 (875) 51.5 (1308) 56.5 (1435) 69.5 (1765) 85.5 (2172) 89.5 (2337)
Width (*3) 26.0 (650) 37.5 (952) 37.0 (940) 45.5 (1156)
Depth (*3) 22.0 (560) 37.0 (940) 40.0 (1016) 46.5 (1181)
(*3) Measurements describe standard unit without feeder or RAM hoppers.
Approximate Dimensions, in. (mm)
Note: Blender models with 7th and 8th component metering include Allen Bradley 10 inch color touch screen standard.
Weight of Machine (approx.), lbs. (kgs)
Shipping Weight (approx.), lbs. (kgs)
(*4) See page 75 for important rate information concerning each model's maximum blending rate.
(*1) Compressed air loaders CANNOT be used to load 150 # blenders.
(*2) Hopper capacity measured excludes straight wall section and is based on vacuum receiver use. Approximate value.
Mixer Capacity, cu.ft. (l.)
Blended Material Discharge Opening, in. (mm)
Mixer Motor Size, HP (kw)
Supply Hopper Capacity - Minors, cu.ft. (l.) (*2)
Weigh Hopper Capacity, cu.ft. (l.)
Typical Batch Size, lbs. (kgs)
Slide Gate Size - Minors, in. (mm)
Supply Hopper Capacity - Majors, cu.ft. (l.) (*2)
Dimensions and Specifications
Maximum Blending Rate, lbs/hr (kgs/hr) (*4)
Number of Materials to be Blended
Slide Gate Size - Majors, in. (mm)
