Filter
Top Products
English – 8 of 12
3D or stereoscopic video can be composed using any several formats. The
AV310 Widescreen supports the most common of these; used by most 3D video
productions. If you know which format is appropriate for a video you wish to view,
simply select that format. If you do not know its format, try each and end your
selecti
ower than 3D video.
Anaglyph is an older 3D format - the type associated with the use of red
een lens viewing glasses.
Batter
ry depenant upon the type of video, 2D or 3D, being played and
they type of battery being used. Each of these has different power consumption
2 minutes for a lithium. With 3D
content, these times are reduced to 10, 10 and 1 minute respectively due to the
nds of displaying 3D video.
k
s. If you have the
iWear earphones removed, volume adjustments must be made through the
speakers are connected.
l
n be
removed should you wish to use
n the
• Repeat the process to remove the second earphone and reverse the
process to reinstall the earphones.
on with the one offering the correct image.
Note: Viewing 2D content consumes less battery p
3D video set for the left eye is the most common.
If 3DL does not present a correctly displayed image, try 3DR.
and gr
y
A low-battery indicator will appear in the upper right corner of the display
when the battery power is nearly depleated. The amount of warning it
provides will va
caracteristics.
When viewing a 2D video, the low-battery indicator illuminates when
approximately 30 minutes of playtime remains when an alkaline battery is in use,
about 10 minutes for a NiMH battery and only
greater power dema
Spea er Volume
The volume of the iWear earphones can be adjusted, when the OSD is
not displayed, by pressing the “+” or “-” Control Button
device to which your headphones or
Speaker Adjustment & Remova
Your iWear earphones ca
an alternate audio system.
To remove the earphones:
• Grasp the hard plastic finger
grip adjacent to the temple.
• Pull straight back o
finger grip. DO NOT pull on
the cable.