Filter
Top Products
Package contents
• Induction battery charger
• Battery packs (2)
• AC adapter
• Quick Setup Guide
Features
Induction battery charger base (front)
# Description # Description
1 Charge indicator 3 On/Off switch
2 DC IN jack 4 Charge indicator
Induction battery charger base (top)
RF-GXBX011
Installing the battery pack
1 Remove the controller battery compartment cover.
2 Install the battery pack into the controller.
3 Plug the AC adapter into the DC IN jack on the charger and
into a power outlet.
Using the charger
Important: The battery pack must be fully charged before you use it for
the fi rst time. Allow up to four hours for the fi rst charge.
1 Turn on the charger.
2 Locate the sticker on the top of the charger, then place the
controller on the charger. For best performance, center the
battery pack where the sticker indicates.
If the charger detects a battery, charging starts and the glow bar
lights red. When charging is complete, the glow bar lights green.
QUICK SETUP GUIDE
Xbox 360™ Induction Battery Charger Kit
Battery notes:
• Rechargeable batteries only attain maximum charging capacity once
they have been charged/discharged several times.
• The battery has a limited service life and playing time is reduced after
many charging cycles.
• Do not short-circuit the battery or place it in fi re.
• Unusable batteries should be disposed of as hazardous waste. Do not
dispose of batteries in household waste.
Important safety information
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifi ers) that produce heat.
8) Do not defeat the safety purpose of the polarized plug. A polarized
plug has two blades with one wider than the other. The wide blade
is provided for your safety. If the provided plug does not fi t into your
outlet, consult an electrician for replacement of the obsolete outlet.
9) Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
10) Only use attachments/accessories specifi ed by the manufacturer.
11) Unplug this apparatus during lightning storms or when unused for
long periods of time.
12) Refer all servicing to qualifi ed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.