Filter
Top Products
APPENDIX B SUMMARY OF DISPLAYS
The lower display on the Profiler/Controller front panel is used to identify the
parameter being displayed. The parameter identifiers are as follows:
S077-B Volume II B-1
Legend Meaning Ref.
Base Mode Parameters Volume Section
Manual Power (xxx = power output value)
II 1.12
Setpoint
II 1.1
Delayed Start
II 1.2
Final (Target) Setpoint for Segment xx (01 - 16)
II 1.6
Time remaining
II 1.6
Cycles remaining
II 1.6
Automatic/Manual Control selection
II 1.6
Event/Alarm Status
II 1.6
Current Program (1 - 4)
II 1.6
Controller Set-Up Mode Parameters
Input Filter Time Constant
II 2.1
Process Variable Offset
II 2.1
Output 1 Power (0 - 100%)
II 2.1
Output 2 Power (0 - 100%)
II 2.1
Proportional Band 1
II 2.1
Proportional Band 2
II 2.1
Reset (Integral Time Constant)
II 2.1
Rate (Derivative Time Constant)
II 2.1
Deadband/Overlap
II 2.1
Bias (Manual Reset)
II 2.1
ON/OFF Differential (both outputs)
II 2.1
ON/OFF Differential (Output 1 only)
II 2.1
ON/OFF Differential (Output 2 only)
II 2.1
Setpoint Lock
II 2.1
Recorder Output Scale Maximum
II 2.1
Recorder Output Scale Minimum
II 2.1