Filter
Top Products
3.2.3 Defining Segments - Time Mode
O077-3 Volume II 3-4
To make a
Ramp segment
To make a
Soak segment
To make an
End segment
Set desired
Final Setpoint value
Press
simultaneously
or set Final Setpoint
to (Range Min. - 1)
Press
simultaneously
or set Final Setpoint
to (Range Min. -1)
Press
Set desired
segment time
Set desired
segment time
Move to next segment
To Program
Options (see
Subsection 3.2.4)
In this mode, the controller is programmed
to ramp to setpoint over a specified length
of time based on the time base selected
(ie 30 minutes).