Filter
Top Products
3 PROGRAM DEFINITION MODE -
CREATING/EDITING A PROGRAM
3.1 ENTRY
To enter Program Definition Mode:
NOTE: If the Program Define Mode lock code has been set to 0, pressing
the Scroll key in Step 2 will give direct access to Program Define Mode; no
entry of lock code is required.
Upon entry into Program Define Mode, the first Segment Definition parameter for
Segment 1 of Program 1 will be displayed.
3-1 Volume II O077-3
Press
simultaneously
Press
Press
To display
To display
Rolling display -
changes every 2 seconds
When display shows:
Set upper display to
Pro
g
ram Define lock code
Then:
NOTE: Default
(factory-set) lock
code is 10.