Filter
Top Products
1 BASE MODE
1.1 DISPLAY SEQUENCE - NO PROGRAM RUNNING
O077-1 Volume II 1-1
Setpoint
value
Process Variable
value
Setpoint
value
Normal Base Mode
display
Read only
Setpoint Strategy = 0, Read only
Setpoint Strategy = 1, adjustable (if SP Lock is OFF
)
Adjustable
Does not appear if
Setpoint Strategy = 1
or if SP Lock is ON
OR
Automatic
Control
Manual
Control
Read Only display (only appears if one or more of
the following is active):
Event Output: E = active, blank = inactive
Alarm 1: 1 = active, blank = inactive
Alarm 2: 2 = active, blank = inactive
This display appears only if
Manual Control is enabled (see Section 2)
Shows/enables selection of program
(Program Number in the range 1 - 4)
Automatic return to normal display if no key activity after one minute.
Use these keys
to adjust displayed
value/setting
In BASE MODE, the unit functions as a single
setpoint controller. Any time a program is not
running, the controller is in Base Mode.