Filter
Top Products
S y s t e m S e t u p
14 15
System Setup
System Setup
Mounting the Sensor Bar Above the Screen
1. Remove the protective film from the foam pads
on the bottom of the Sensor Bar.
• The front of the Sensor Bar should be
aligned close to the front of the TV.
• The center of the Sensor Bar should be
aligned with the center of the TV.
2. For additional stability, you can add adhesive
backed foam tape from the supplied sheet.
3. Mount the Sensor Bar to the top of the TV.
Mounting the Sensor Bar Below the Screen
1. Remove the protective film from the foam pads
on the bottom of the Sensor Bar.
2. For additional stability, you can add adhesive
backed foam tape from the supplied sheet.
3. Mount the Sensor Bar to the front edge of the
surface the TV is sitting on. Do not place the
Sensor Bar below the surface that the TV is
sitting on; for example, on shelves below
the TV.
• The center of the Sensor Bar should be
aligned with the center of the TV.
• The front of the Sensor Bar should be
aligned with the front of the surface
the TV is sitting on.
Wii Operations Manual
148Hx210W