Heath Zenith 598-1067-03 Manual

A SERVICE OF

next previous

© 2008 598-1067-03

Wireless Plug-In

Chime

This package includes (Style of push button and

chime may vary from illustration):

• Wirelessplug-inchime

• Wirelesspushbuttonwithbattery(Specic

models include 2)

• Hardwarepack

1. Install alkaline type A23 12 volt push button

battery (included). Remove back of case by

pushingintabonbottomwithasmallscrew-

driver (see Figure 1). See diagram inside push

button for correct battery orientation. Note: If

batteries are preinstalled, remove orange

battery tab.

2. Plug in wireless chime. To reduce the risk of

electrical shock, this equipment has a polar-

izedplug(onebladeiswiderthantheother).

Thisplugwilltinapolarizedoutletonlyone

way.Iftheplugdoesnottfullyintheoutlet,

reversetheplug.Ifitstilldoesnott,contacta

qualiedelectriciantoinstalltheproperoutlet.

Do not attempt to bypass this safety feature.

3.

Test range. Temporarily position push button

whereyouwantitmounted.Presspushbutton

toverifychimeandpushbuttonworkproperly.If

chime does not sound, see Troubleshooting.

Figure 1

WARNING: To prevent possible

SERIOUS INJURY or DEATH:

  

batteries.

 

