COMPLIES WITH:
•
ASME A112.18.1M-1996
•
ASSE 1016-1996
•
CSA B125-93
•
Showerhead GSA A-A-240
Indicates ADA compliance to
CABO/ANSI A117.1-1992
•
ASSE Seal Authorized
•
City of L.A. approved
•
CSA Certified
•
IAPMO Listed
BATH MIXING
VALVES
■ Tub/Shower (1748 Series)
■ Single Handle
■ Monitor
®
with Scald-Guard
®
Valve
■ Pressure Balance
■ Volume Controlled with Lever Handle
■ Temperature Controlled with Dial
Submitted Model No.: _____________________________________________
Specific Features: ________________________________________________
STANDARD SPECIFICATIONS:
• Requires 1
1
⁄
2
" (38 mm) wall cavity.
•
Back-to-back installation capability.
• Solid brass fabricated body.
•
Monitor
®
with Scald-Guard
®
valve.
Maintains a balanced pressure of hot
and cold water even when a valve is
turned on or off elsewhere in the system.
• Lever volume control handle; temperature
adjustment dial.
• Field adjustable to limit dial rotation
into hot water zone.
•
Maximum dial rotation adjustable
between 90° and 180°.
• Red and Blue graphics indicate
hot/cold temperature adjustment.
1748
1748-MDS
Flow (U.S. Gallons Per Minute)
2" (50.8 mm)
C/L Supply
Lines
If recessed, the escutcheon
screws may need to be shortened.
Plus or minus 1/2" (12.7 mm)
- B -
Cover must be removed prior
to installation of trim.
Inlets
8" (203 mm) Min.-
18" (457 mm) Max.
7 1/2"
(190.5 mm)
A
Dimensions
A
I.P.S. or C.W.T. 2
1
/2
" (63.5 mm)
I.P.S. or C.W.T. w/stops 5
1
/2
" (139.7 mm)
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
2.D.17