Filter
Top Products
Table of Contents
Mobile Power Pack User Guide
Checking the Charge Status
Powering Device
Checking the CP-MBC Power Status
Troubleshooting
Introduction
Safety Precautions
Specifications Radio & Interference Statement
Warranty
Product Components
Item
DC Input
DC Output
Specification
K01-1110000-00
10
11
12
5
3
4
2
1
7
9
8
Reliability. Quality. Value.
Reliability. Quality. Value.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .2
Package Contents . . . . . . . . . . . . . . .. . . . . . . . . . . . .2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . .. . . .3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Product Components . . . . . . . . . . . . . . . . . . . . . . . . .5
Charging the CP-MBC . . . . . . . . . . . . . . . . . .. . . . . . .6
Powering Devices . . . . . . . . . . . . . . . . . . . .. . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .10
Radio & TV Interference Statement . . . . . . . . . . . . . . .11
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Thank you for purchasing a CyberPower product. To enjoy all the features and benefits of
this Mobile Power Pack, please read and follow all installation and operation instructions.
The charge status of PC- MBC is indicated by the green LED status
indicator. If the green LED is flashing, this indicates that the power pack is
being charged. See the table below for the level of battery status. Continue
charging until the green LED lights up solid and does not flash. This
indicates that the power pack is fully charged.
Use an appropriate USB cable to power devices such as iPods
®
, MP3
players, mobile phones, PDAs and portable gaming systems. Connect the
USB cable to the type A USB powering port on the CP-MBC and the other
end of the cable to the device that you wish to power.
The power status of the CP-MBC Power Pack's available power is indicated
by the orange LED indicators. The level of available power is described in the
following table:
This equipment has been tested and found to comply within the limits for a
Class B digital device, pursuant of Part 15 of the FCC rules. The limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. There
is no guarantee, however, that interference will not occur in a particular
installation.
CyberPower warrants this CP-MBC to be free from defect in material or manufacture for
1 year. If a defect results in product failure during its normal use, CyberPower's sole
responsibility is to repair or replace (at its sole option) the CP-MBC.
The foregoing 1 Year Limited Warranty is the consumer's sole and exclusive remedy
and excludes any incidental or consequential damages. Some States do not allow the
exclusion or limitation of incidental and consequential damages, so certain of the above
limitations or exclusions may not apply to you (the Consumer). This 1 year limited
warranty gives the Consumer specific legal rights and the Consumer may have other
rights, which vary from State to State.
To make a 1 year Limited Warranty claim:
1. Pack and ship the CP-MBC with a dated Proof- of-Purchase receipt to CyberPower at
4241 12th Ave E, Suite 400, Shakopee, MN 55379;
2. Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN;
3. Clearly include your name and address on the outside packaging and on a sheet of
paper enclosed in the box with the CP-MBC that is being returned.
4. You MUST prepay all shipping costs and you are responsible for packaging and
shipment.
CyberPower will inspect and examine the CP-MBC. If the CP-MBC is defective in
material or workmanship, CyberPower will repair or replace it and return it to you at
CyberPower’s expense at the place you have indicated.
Caution
1. Please charge your CP-MBC the first time for a full 8 hours before regular use.
2. When charging the CP-MBC using the AC Adapter or a PC, do not connect any
devices to the type A USB power port. Powering a device while charging the internal
battery will result in a longer charge time for the CP-MBC.
3. Do not charge CP-MBC through a USB hub. Other devices connected to the hub
may reduce the available power and increase the time required to charge the CP-MBC.
Turning On the CP-MBC
Press the power on/off button for 1 second. The orange LED will light up indicating that
the power pack is ready to power a device.
If the CP-MBC is not being used (charging or discharging) after 5 minutes, the orange
LED will automatically turn off. The CP-MBC will switch to sleep mode. To turn the CP-
MBC back on, just press the power on/off button again until the orange LED lights up.
Caution
When both orange & green LEDs light up, this indicates that the power
consumption of the device is greater than 1.2A current. The CP-MBC is
overloaded.
To turn the CP-MBC off, press and hold the power on/off button for 2
seconds.
During Charging
75 ~100%
50 ~75%
25 ~50%
Below 25%
Model No. CP-MBC
CyberPower Mobile Power Pack (CP-MBC) is a rechargeable Power Pack that
is designed for powering mobile devices, iPods
®
, MP3 players, mobile phones,
PDAs and portable gaming systems via the USB Mini-B Cable. CP- MBC is an
ideal travel mate and backup battery that supports and powers devices on the
go.
Features
- Recessed power button prevents accidental start up.
- Auto-shutdown feature protects the CP-MBC from draining.
- High energy-density Lithium-polymer battery.
- Long lasting rechargeable battery with up to 500 cycles.
Package Contents
1. Mobile Power Pack ( CP-MBC)
2. 100-240 Volt AC to 5V USB Transformer
3. USB 2.0 Device Cable
4. User Manual
Before using the CP-MBC, please read the following warnings carefully. Use the product
according to the procedures described in this manual. Failure to follow these safety
precautions may result in fire, explosion, electrical shock or other dangers.
1. Do not disassemble this product, or any of its parts.
2. Store between -4 to 140°F (-20 to 60°C).Operate between 32 to 113°F(0 to 45°C).
3. Do not immerse this product in water or other liquids, as such use may result in fire or
electrical shock. If water or other liquids enter the battery interior, unplug the product
immediately from any attached power source or device.
4. Do not use this product with wet hands. Moisture in or on this product may result in
electrical shock.
5. Do not expose this product to direct flame or leave it in an over-heated condition, as
the battery may explode.
6. Store this product in a cool and dry environment when not in use.
7. Do not puncture this product. Puncturing the battery may cause the release of harmful
substances.
8. It is normal for the CP-MBC to become warm during charging.
9. Keep this product out of the reach of children. Ensure that all users read these
warnings and instructions before using.
Prior to Use
NOTE: Charge the CP-MBC for a full eight (8) hours prior to using for the first time.
Orange LED Status Indication
Light
Flashing 3 sec
Flashing 2 sec
Flashing Fast
LED off
Green LED Status Indication
Light
Flashing 3 sec
Flashing 2 sec
Flashing Fast
Available Power
75 ~100%
50 ~75%
25 ~50%
Below 25%
Fully Depleted
Problem
CP-MBC does not
power the device.
CP-MBC does not
charge.
Possible Cause
1. The CP-MBC may
have switched to Auto
Sleep Mode.
2. The power of device is
over SPEC (5V, 1.2A).
3. The battery is out of
power.
1. Incorrect connection
between charger and
CP- MBC product.
2. No power source from
outlet.
Solution
1. Press the power on/off
button for 1 second to wake
the CP-MBC.
2. Check the power
specification of the device
before charging with the
CP-MBC.
3. Charge the CP-MBC
using one of the two
methods that are described
under "Charging the
CP-MBC" in this user's
manual.
1. Mini B port on the CP-
MBC is for charging.
2. Checking the wall outlet.
A Type Port
Mini B Charging Port
Connect the included AC
transformer or USB cable to
charge the battery.
Power On/Off
Press the button momentarily
to turn on or off the unit.
Green LED
Charge indicator LED
Orange LED
Power indicator LED
Power on/off indicator
Powering Port
Use the included USB cable
to power your device.
Option 1.
mini B Port
Option 2.
mini B Port
A Type Connector
Input Voltage Range
Input Power Source
On Battery Output Voltage Range
On Battery Output Maximum Current
On PC USB Port Maximum Current
On AC Adapter Output Maximum Current
Capacity
Output Power
Powering Indication
Capacity Indication
Charge time
Size
Weight
Environmental
5V
Charge using included AC transformer or
upstream USB port.
5V +/-5%
1.2A
500mA
1A
6 Watt-hours
5 Watt Maximum Continuous Power
6 Watt Peak Power - Short Duration
Orange LED
Green LED
Recharges to 100% in 3.5 hours
4.06 x 2.36 x 0.58 in
3.264 OZ
Storage: -4 to 140°F (-20 to 60°C)
Operation: 32 to 113°F(0 to 45°C)
Charging the CP-MBC
6
You can charge the CP-MBC using any of following methods:
Option 1- Using the AC Power Adapter: Use the included AC power adapter to
charge the CP-MBC. Plug the adapter into a wall outlet and connect the Mini-
B port to the CP-MBC.
Option 2- Using Your Notebook or PC: Charge the CP-MBC through your
notebook or desktop PC. Use the included USB 2.0 Device cable, connect
mini-B port to the CP-MBC and connect A-type port to a Notebook or PC.
CyberPower Systems (USA), Inc.
4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.
TEL: (952) 403-9500 FAX: (952) 403-0009 Toll-Free: (877) 297-6937
E-mail: sales@cyberpowersystems.com Web: www.CPSww.com
Entire contents copyright C 2008 CyberPower Systems, Inc.
All rights reserved. Reproduction in whole or in part without permission is prohibited.