Filter
Top Products
Bosch Security Systems | 2007-02 | 9922 141 70691 en
DCN Wireless | Installation and User Instructions | Central Devices en | 54
10.6.5 Monitoring
Use the 2 Monitoring menu item to open the Monitoring
sub-menu (refer to table 10.22).
10.6.6 DCN-WCCU Enquiry
Use the 3A CCU menu item to open the CCU
sub-menu. The menu items in this sub-menu give
general data about the central control unit (refer to table
10.23).
table 10.22: Monitoring sub-menu (* = default)
Menu item Parameter Value Description
2A Source/Volume Signal:
Floor
Input 1
Input 2
Output 1
Output 2
Volume level:
-31 to 0 dB (16 dB*)
-31 to 0 dB (16 dB*)
-31 to 0 dB (16 dB*)
-31 to 0 dB (16 dB*)
-31 to 0 dB (16 dB*)
The signal that is available
on the headphones
socket of the central
control unit and its volume
level.
Note
This data must be mentioned in all service
requests and failure reports.
table 10.23: DCN-WCCU Enquiry sub-menu (* = default)
Menu item Parameter Value (read-only) Description
3Aa Serial Number --- e.g. 20.0.00362 The hexadecimal serial
number of the central
control unit.
3Ab HW Version --- e.g. 3.0 The version number of the
hardware of the central
control unit.
3Ac FPGA Version --- e.g. 1.06 The version number of the
FPGA firmware of the
central control unit.
3Ad SW Version --- MM.mm.bbbb
e.g. 2.20.1234
The version number of the
software of the central
control unit.
• MM: Major release no.
• mm: Minor release no.
• bbbb: build no.
3Ae FW Version --- e.g. 4.00.1234 The version number of the
firmware of the central
control unit.