Filter
Top Products
Thank you for purchasing this Blockhead Wireless Controller for Gamecube
®
and Wii
TM
. We hope you enjoy it.
For your personal safety and for the safety of others, please carefully read this instruction manual as well as
the instruction manuals that came with your game consoles and games.
Use this controller only as instructed. Read all instructions before operating controller.
INSTRUCTION MANUAL
To prevent fire or shock hazard, do not expose this controller to rain or moisture.
Do not disassemble. Refer to qualified personnel only.
This controller should only be operated from the power source indicated in these directions or on the
controller.
Never push objects of any kind, other than authorized items, into the product as they may touch dangerous
voltage points or short out parts that could result in fire or electrical shock.
Failure to follow these directions may violate the warranty.
1 2
PRECAUTIONS
For GameCube
®
/Wii
TM
Cordless Controller
Some medical studies have suggested that long periods of repetitive motion, coupled with poor habits may be linked
to certain types of physical discomfort or injuries. It is important to take frequent breaks during game play, and if you
feel aching, numbness, or tingling in your arms, wrists, or hands, consult a qualified health professional.
FEATURES
Auto Sleep and wake functions
Power switch
2 fully analog joysticks with rubber contacts
8-way D-pad
Macro feature
Five fire buttons (A, B, X, Y, Z ), and two triggers
Working distance up-to 40 feet
Wireless Connection Tips
1. First, make sure your game console is powered up and not in standby.
2. Turn your controller off, count to 5, and turn it back on. Your controller may have entered sleep mode.
Note:
Not All Wii games support the GameCube Controller. Consult your games manual for controller compatibility.
Model: BHGC75
2. Turn your controller off, count to 5, and turn it back on. Your controller may have entered sleep mode.
3. If that doesn't work, turn off the controller. Unplug the receiver, count to 5, and plug the receiver back in. Now
turn your controller back on.
4. If none of these steps work you can try a manual forced connection. Press and release the connect button on
the receiver and immediately press and release the connect button on the back of the controller near the on/off
switch.
5. If it still doesn't work, make sure no objects are blocking the signals between the controller and the receiver.
START / MACRO / MACRO LED
POWER(Green LED)
RX(Yellow LED)
DIAGRAMS
START
CON
MACRO
1. Press the MACRO button, the programming function is active.
2. Select the button(Z) to be programmed by pressing that button.
3. Press the desired button(s) to be programmed into the selected button above.
4. Press the MACRO button to turn the programming function OFF when the desired button assignments
are finished.
Program Tips