Filter
Top Products
WIRING DIAGRAM:
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
MKW-DK/A Instr.
0812JD
Toll Free Technical Support:
1-800-692-0200
E-mail tech@aiphone.com
+
-
Power
Supply
1A1
1A2
L
L
+
-
Aiphone Monitor
Motion Detector*
White
Yellow
MKW-DK/A
Must be installed within 2' of door station.
Installation Guidelines:
1. The motion detector must provide a normally open momentary contact
. A Photoelectric beam, pressure
pad, or remote call button can also be used to activate the video door station.
2. MKW-DK/A must be installed within 2 feet of video door station. The unit is not weather resistant, so it should
be installed in a protected enclosure, preferably in the box behind the video door station.
3. The MKW-DK/A can be used to connect a motion detector to all JA, JF, and KC Series video door stations.
Contact Aiphone for information on getting remote activation on other video units.
4. The above diagram is representative of the installation of the MKW-DK/A to an Aiphone video system.
Terminal designations on the monitor/adaptor will vary slightly depending on the system being installed.
Note:
For complete system installation, please refer to the instruction manuals included with the video system.
Door Strike
PT-1210N
(AC Transformer)
Remote Activation Interface Adaptor for Video Door Stations
The MKW-DK/A Adaptor allows any standard motion detector or activation device with a normally open
contact to be interfaced with the JA, JF, or KC Series video door station. When the activation device is
tripped, the camera will turn on, and a chime will be heard at the inside monitor station(s), indicating that
there is some activity near the door station location.
- INSTRUCTIONS -
A1
A2
Video Door
Station
* Use any activation device that provides a
normally open
momentary dry closure.
Motion Detector
Remote Mushroom push button
PIR detector
Pressure Pad
MKW-DK/A Dimensions (HxWxD):
5/8" x 3" x 5/8"